• 80-120 ml per square metre depending on the surface condition/roughness of the substrate.
• Can be used with CEM I and CEM II cements.

• Shake container well before use.
• Apply evenly to the screed surface using a lambskin roller (medium pile length) in a criss-cross pattern.
• Immediately prime highly absorbent areas in the fresh phase, avoiding the formation of puddles.
• Remove soiling with AP Pro 1 from building elements (e.g. door frames) immediately with a damp, clean cloth.

Substrate preparation

• Screed must be ready for covering before application.
• The substrate to be treated must also be clean, free of cracks, firm, dry and free of separating agents.
• Sand surfaces and vacuum with an industrial vacuum cleaner.
• Wounded areas must always be sanded down to a firm grain.