• Shake the container well before use.
• Apply evenly to the screed surface with a lint-free lamb‘s wool roller (medium pile length), avoiding the formation of puddles.
• If the substrate is particularly absorbent, prime with diluted OVS 512 (add max. 20% water). 
  Two undiluted applications are required when using the product as surface sealer on its own.
  For all other applications, one application is sufficient. 
  Drying time after priming at +20°C and 60% rel. air humidity: approx. 5 hours. 
  Drying time after each application at +20°C and 60% rel. air humidity: approx. 3 hours.
• Drying times > 24 hours between individual applications must be avoided.
• Fully resistant to mechanical stress within the scope of the material-specific properties after a drying time of at least 72 hours. 

Proceed as follows when applying renovation coatings:

• Sand and vacuum-clean the surfaces thoroughly.
• Then wipe down the surfaces with a damp mop and allow to dry.
• Depending on the degree of wear, apply one or two liberal undiluted coats of OVS 512.

• Screed must be ready for covering before application
• In addition, the substrate to be treated must be clean, without cracks, solid, dry and free of release agents
• Sand surfaces and vacuum with an industrial vacuum cleaner
• All chafed patches must be sanded down to the solid grain 

• Changes in transparency and/or minor chalking in case of exposure to UV light and condensation water can be ruled out.
• Organic dyestuffs (e.g. in coffee, red wine or vegetable leaves and needles) as well as various chemicals (e.g. disinfectants, acids, etc.) may result in changes in colour.
• Abrasion may lead to scratching of the surface.
• The functionality of the product is not affected as long as the sealing film is not damaged down to the screed material.